PRODUCT INTRODUCTION
Robot vacuum FC-VC145 is an efficient companion in auto-cleaning houses which possess many outstanding features such as accurate navigation, identification and avoidance of obstacles smartly. Great cleaning efficiency and easy to control.
Robot vacuum FC-VC145
SPECIFICATIONS:
Model | FC-VC145 | ||
Voltage (V) | 14.4V – 14.8V | Capacity (W) | 22 |
Charge station | |||
Output Voltage (V) | 19=== | Output Electricity (A) | 0.6 |
Remote Control | Input Voltage(V): 3=== | ||
Wall-charger | |||
Input: 100-240V Max 50/60Hz | Output: 19V ==== 0.6A | ||
Battery: | Li-ion 2400mAh |
CONTROL PANEL
Control Panel of Robot Vacuum Frico
1. Setting the hours of operation | 4. Area cleaning mode |
2. Basic cleaning mode | 5. Start/ Pause |
3. Back to charge station |
STRUCTURE AND UNITS
Structure and units of Robot Vacuum Frico
1. Anti bumping sensor | 6. Battery cover | 11. Side brush |
2. Display screen ị | 7. Right/Left Wheel | 12. Rubbish bin |
3. Control Panel | 8. Middle brush | 13. Charging port |
4. Rubbish open button | 9. Wall Sensor | 14. Power Switch |
5. Charge spot | 10. Middle wheel |
OUTSTANDING FEATURES
Basic cleaning mode
The robot will move to the edge of the wall to find the next area to be cleaned. This mode is recommended to use for carpets.
With automatic cleaning mode
The robot will move in a “zig-zag”. The robot will automatically calculate and clean the missed area.
Spot cleaning mode
The robot will focus on cleaning in one area. This mode is recommended for areas with a high gathering of dirt.
Maximum cleaning mode
The robot will increase the suction for deep cleaning. This mode is recommended to use for floors that are generally dirty or have a lot of dust.
Edge cleaning mode
The robot will run along the wall. This mode is recommended to use to clean the corners and edges of the room.
THE GUIDELINE TO SOLVING PROBLEMS WHEN USING ROBOT VACUUM FC-VC145
When problems occur, the screen will show different error codes that stick to the sound lasting “beep”.
Checking through the following table to have extra information about errors and reasons when using Robot Vacuum Frico.
STT | Reason | Showing screen | Sound | Solving |
01 | Left wheel abnormality | E11 ⚠️ | Beep: 1 time | Check the left wheel |
02 | Right wheel abnormality | E12 ⚠️ | Beep: 1 time | Check the right wheel |
03 | Left brush abnormality | E13 ⚠️ | Beep: 1 time | Check the left brush |
04 | Right brush abnormality | E14 ⚠️ | Beep: 1 time | Check the right brush |
05 | Middle brush abnormality | E15 ⚠️ | Beep: 1 time | Check the middle brush |
06 | Robot is not on the floor | E21 ⚠️ | Beep: 2 time | Put robot in an open space and restart |
07 | Wall Sensor abnormality | E22 ⚠️ | Beep: 2 time | Check the wall sensor |
08 | Anti-bumping sensor abnormality | E23 ⚠️ | Beep: 2 time | Check anti-bumping sensor |
09 | Robot is stuck | E31 ⚠️ | Beep: 3 time | Put robot in an open space and restarti |
10 | Fan abnormality | E32 ⚠️ | Beep: 3 time | Restart the robot.If the problem is still exist, please contact the service center for support |
11 | Water bottle abnormality | E33 ⚠️ | Beep: 3 time | Check the water bottle if it was put in the wrong place |
12 | Battery abnormality | E41 ⚠️ | Beep: 3 time | Change the battery |
13 | Anti-bumping module sensor abnormality | E42 ⚠️ | Beep: 4 time | Restart the robot. If the problem still exists, please contact the service center for support |
14 | Navigation module sensor abnormality | E43 ⚠️ | Beep: 5 time | Restart the robot. If the problem still exists, please contact the service center for support |
15 | Low battery | LO ⚠️ | / | When the robot is in sleep mode, make sure the robot is fully charged to have enough power to operate |
16 | Highly effective filter is stopped up | / | Cleaning highly effective filter |
Contact to Hotline 0787.006.715 (Ho Chi Minh) or 0904.510.916 (Ha Noi) to order Robot vacuum FC-VC145 hoặc to clear up queries about the products (if any)
FRICO Lifestyle Centre is happy to serve you.
Nhận xét về sản phẩm
There are no Đóng góp yet.